西门子一级代理商PLC模块代理
QR16模块为8点和16点继电器输出型,每点额定电流为2A;EM DT08模块和EMQT16为8点和16点晶体管输出型,每点额定电流为0.7**。
数字量输入/输出混合模块有4个,型号有EM DR16、EM DT16、EM DR32和EM DT32,EMDR16/DT16模块为8点输入/8点输出、继电器/晶体管输出型,每点额定电流为2A/0.7**;EMDR32/DT32模块为16点输入/16点输出、继电器/晶体管输出型,每点额定电流为2A/0.7**。西门子一级代理商PLC模块代理
(3)信号板
S7-200 SMARTPLC有3种信号板,分别为模拟量输入/输出信号板、数字量输入/输出信号板和RS-485/RS-232信号板。据字范围为-27648~27648;模拟量输出信号板型号为SBAQ01,1点模拟量输出,输出量程为±10V或0~20mA,对应数据字范围为±27648或0~27648。
数字量输入/输出信号板型号为SBDT04,为2点输入/2点输出、晶体管输出型,输出端子每点较多额定电流为0.**。
RS-485/RS-232信号板型号为SB CM01,可以组态RS-485或R-S232通信接口。
Benefits
Ideal solution for configuring Industrial Ethernet line and startopologies西门子一级代理商PLC模块代理
Space-saving installation in the control cabinet thanks tocompact design in SIMATIC S7-1500 format and mounting option on theSIMATIC S7-1500 DIN rail
Extended temperature range from -40 °C to +70 °C(X108PoE: -20 °C to +60 °C)
Reliable device connection with industry-standard FastConnectplugs
Installation is possible without a patch field by means of IE FCRJ45 Plug 180 and IE FC Standard Cable
Uncrossed connecting cables can be used due to the integratedautocrossover function
西门子一级代理商PLC模块代理
Application
The switches of the SCALANCE XC-100 product line support theinexpensive construction of Industrial Ethernet line or startopologies with switching functions for machine level applications.They are designed for installation in the control cabinet. Thedevices are approved for ATEX Zone 2 and IECEx, which allow them tobe used in hazardous areas. The SCALANCE XC108 also has E1approval, making the products especially suitable for use in publictransportation vehicles. Furthermore, the SCALANCE XC-100 productline features various approvals for shipbuilding applications.
Design
The SCALANCE Industrial Ethernet switches with enclosure rearsections of metal are optimized for mounting on a standard DIN railand an S7-1500 DIN rail. Direct wall mounting in various positionsis also possible. Thanks to the enclosure dimensions thatcorrespond to those of the SIMATIC S7-1500, the devices are ideallysuited for integration into automation solutions and mounting onthe SIMATIC S7-1500 DIN rail. Mounting on a SIMATIC S7-300 DIN railis also possible.
The SCALANCE XC-100 switches feature:
A 4-pin terminal block for connecting the redundant supplyvoltage (2 x 24 V DC)
A raised row of LEDs for displaying status information (power,link status, data communication, signaling contact)
A 2-pin terminal block for connecting the floating signalingcontact
A SET button for on-site configuration of the signalingcontact
The following port types are available:
10/100BaseTX, RJ45 port;
automatic detection of the data rate (10 or 100 Mbps), withautosensing and autocrossover function for connecting IE FC cablesvia IE FC RJ45 Plug 180 over distances up to 100 m100BaseFX, ST/BFOC port;
for direct connection to the Industrial Ethernet glass FOC up to5 km100BaseFX, SC port;
for direct connection to the Industrial Ethernet glass FOC up to5 kmFunction
Construction of electrical and optical Industrial Ethernet lineor star topologies
Selected connecting cables can be used due to autocrossoverfunction integrated in the ports
Load disconnection through integral switch functionality
Easy network configuration and network expansion
No limitation of the expansion of the network when switches of theSCALANCE XC-100 product line are cascaded
Networktopology and network configuration
The SCALANCE XC-100 switches are typically installed with thestations to be connected in a control cabinet. They can be mixedelectrically and optically in star and line topologies.
When configuring the network, the following boundary conditionsmust be observed:
Length of the twisted pair line between two SCALANCE XCswitches:
Max. 100 m with Industrial Ethernet FastConnectproducts
Length of the optical cables:西门子一级代理商PLC模块代理
Max. 5 km with Industrial Ethernet glass fiber-opticcables
西门子一级代理商PLC模块代理
Star-shaped network topology with SCALANCE XC124
Electrical and optical line topology with SCALANCE XC106-2 andXB004-2 as well as connection and supply of data terminal deviceswith Power over Ethernet (PoE) by SCALANCE X108PoE
Diagnostics
The following information is displayed on site by LEDs:
Power
Port status
Data traffic西门子一级代理商PLC模块代理
The Industrial Ethernet switches of the SCALANCE XC-100 line canalso be monitored using the floating signaling contact.
编者心语西门子一级代理商PLC模块代理
1.和S7-200 PLC相比,S7-200 SMARTPLC信号板配置是特有的,在功能扩展的也兼顾了安装方式,配置灵活,且不占控制柜空间。
2.读者在应用PLC及数字量扩展模块时,一定要注意针脚载流量,继电器输出型载流量为2A;晶体管输出型载流量为0.7**。在应用时,不要*过上限值;如果*限,则需要用继电器过渡,这是工程中常用的手段。
(4)模拟量扩展模块
模拟量扩展模块为主机提供了模拟量输入输出功能,适用于复杂控制场合。它通过自带连接器与主机相连,并且可以直接连接变送器和执行器。模拟量扩展模块通常可以分为3类,分别为模拟量输入模块、模拟量输出模块和模拟量输入/输出混合模块。
模拟量输入模块有2种,分别为2路输入和4路输入, 对应型号为EMAE04和EMAE08,量程有4种,分别为±10V、±5V、±2.5V和0~20mA,其中电压型的分辨率为12位+符号位,满量程输入对应的数字量范围为-27648~27648,输入阻抗≥9MΩ;电流型的分辨率为12位,满量程输入对应的数字量范围为0~27648,输入阻抗为250Ω。相关设备是为了充分和方便地利用系统硬件和软件资源而开发和使用的一些设备,主要有编程设备、人机操作界面等。
① 编程设备主要用来进行用户程序的编制、存储和管理等,并将用户程序送入PLC中,在调试过程中,进行监控和故障检测。S7-200SMART PLC 的编程软件为STEP 7-Micro/WIN SMART。
② 人机操作界面主要指*操作员界面。常见的如触摸面板、文本显示器等,用户可以通过该设备地完成各种调整和控制任务。1.2 S7-200SMART PLC的CPU模块外部结构及外部接线 CPU模块的外部结构
S7-200 SMART P能量。西门子一级代理商PLC模块代理