西门子一级授权代理商|DP电缆代理商
概述 STARTER 调试工具操作简便，可用于：
该软件可作为独立 PC 应用软件运行，也可作为与 TIA 兼容的程序集成在 SIMATIC STEP 7中或集成到 SCOUT 工程组态系统中（适用于 SIMOTION）。其基本功能和操作在两种情况下是相同的。 除 SINAMICS 变频器外，STARTER 还可支持 MICROMASTER 4 装置。 使用项目向导，可以将驱动系统添加到项目结构树中。 面向解决方案的对话窗导航功能可以向初学者提供支持，标准图形化显示功能可在设置驱动参数时帮助直观理解。 调试由向导功能进行引导，该向导可完成传动中的所有基本设置。作为传动组态过程的一部分，只需设置一些传动参数，便可启动和运行电机。 所需具体设置使用图形化参数化界面，界面也可显示传动运行原理。 可独立设置的示例包括：
专家们可以使用专家列表明确、快速地随时访问具体参数。对常用参数的具体编译可保存在专用的用户列表和监控表中。 还有下列功能可用于优化：
诊断功能提供以下信息：
必须满足以下低系统要求：
STARTER（V5.1 SP1 及更高版本）可安装在虚拟机中。为此，请选择可使用下面指定版本或较新版本的虚拟平台：
使用以下来宾操作系统，可以在所选的虚拟化平台中安装 STARTER：
1) 取决于驱动装置。不支持MICROMASTER 4、SINAMICS G110、SINAMICS G120（固件版本<V4.4）、SINAMICS G110D 和 SINAMICS G120D（固件版本<V4.5）。 集成可通过 PROFIBUS 或 PROFINET/以太网或串行接口来交换数据。 为了执行编程和维护，可通过 PROFIBUS 将编程器/PC 连接到 CU320-2 控制单元。必须使用连接电缆在编程器/PC 上进行PROFIBUS 连接。 也可以通过以太网、CBE20 通信板（可选）或 CU320-2 控制单元上的以太网接口 -X127 建立 CU320-2控制单元和编程器/PC 之间的连接。 注：西门子一级授权代理商|DP电缆代理商 端子排 -X127 适合于与编程器/PC 之间的通信连接，仅用于维修和调试。 选型和订货数据（印刷版）DescriptionArticle No.STARTER commissioning toolfor SINAMICS andMICROMASTEREnglish, French, German, Italian,Spanish6SL3072-0AA00-0AG0 Note: In addition to the STARTER commissioning tool, SINAMICS DriveControl Chart (SINAMICS DCC) can be installed. This allows thedevice functionality in the SINAMICS drive system to be expandedwith dedicated technology functions as required. Further information about SINAMICS DCC can be foundin the section SINAMICS DCC (Drive Control Chart) withSTARTER. AccessoriesDepending on the version of the Control Unit (CU), the Control Unitof the drive unit can communicate with the programming device (PG)or PC via PROFIBUS or PROFINET/Ethernet or via a serial interface.The following accessories are available for the particular drivesystem as listed in the following table.西门子一级授权代理商|DP电缆代理商 Description Recommended accessoriesFor communicationbetween the drive unit and the programming device orPC Article No.MICROMASTER 4RS232PC converterconnection kit6SE6400-1PC00-0AA0PROFIBUSSIMATIC DP plug-incable12 MBaud, for PG connection, pre-assembled with2 × 9‑pin SUB D connector, 3 m (9.84ft)6ES7901-4BD00-0XA0SIMATIC ET 200pro FC‑2USBPCconverter connection kit 2Mini USB interface cable forcommunication with a PC, 3 m (9.84ft)6SL3255-0AA00-2CA0PROFIBUSConnection to the PROFIBUS system inthe plantSee supplementary products 1)PROFINET/EthernetConnection to the PROFINET system in the plantSeesupplementary products 1)SINAMICS G110RS232PC converterconnection kitScope of supply:9‑pin SUB D connectorRS232 standardcable, 3 m (9.84 ft)6SL3255-0AA00-2AA1SINAMICS G120CUSBPCconverter connection kit 2Mini USB interface cable forcommunication with a PC, 3 m (9.84ft)6SL3255-0AA00-2CA0SINAMICS G120USBPC converter connectionkit 2Mini USB interface cable for communication with a PC, 3 m(9.84 ft)6SL3255-0AA00-2CA0PROFIBUSSIMATIC DP plug-incable12 MBaud, for PG connection, pre-assembled with2 × 9‑pin SUB D connector, 3 m (9.84ft)6ES7901-4BD00-0XA0PROFINET/ EthernetStandard CAT5 Ethernet cableor PROFINET cable–SINAMICS G110MUSBPC converter connection kit2Mini USB interface cable for communication with a PC, 3 m(9.84 ft)6SL3255-0AA00-2CA0PROFIBUSConnection to the PROFIBUSsystem in the plantSee supplementary products 1)PROFINET/EthernetConnection to the PROFINET system in the plantSeesupplementary products 1)SINAMICS G110DOptical USBUSBinterface cableFor communication with a PC, 2.5 m (8.2ft)6SL3555-0PA00-2AA0SINAMICS G120DUSBPC converter connectionkit 2Mini USB interface cable for communication with a PC, 3 m(9.84 ft)6SL3255-0AA00-2CA0PROFIBUSConnection to the PROFIBUSsystem in the plantSee supplementary products 1)PROFINET/EthernetConnection to the PROFINET system in the plantSeesupplementaryproducts 1)SINAMICS S110RS232SIMATIC S7 connectingcableNull modem cable, 6 m (19.69ft)6ES7901-1BF00-0XA0PROFIBUSCP 5711 communication moduleUSBadapter for connecting a PG or notebook to PROFIBUS or MPIUSB cable(2 m (6.56 ft)) included in scope ofsupply6GK1571-1AA00 SIMATIC DP plug-incable12 MBaud, for PG connection, pre-assembled with2 × 9‑pin SUB D connector, 3 m (9.84ft)6ES7901-4BD00-0XA0PROFINET/ EthernetStandard CAT5 Ethernet cableor PROFINET cable–SINAMICS S120RS232SIMATIC S7 connectingcableNull modem cable, 6 m (19.69ft)6ES7901-1BF00-0XA0PROFIBUSCP 5711 communication moduleUSBadapter for connecting a PG or notebook to PROFIBUS or MPIUSB cable(2 m (6.56 ft)) included in scope ofsupply6GK1571-1AA00 SIMATIC DP plug-incable12 MBaud, for PG connection, pre-assembled with2 × 9‑pin SUB D connector, 3 m (9.84ft)6ES7901-4BD00-0XA0PROFINET/ EthernetStandard CAT5 Ethernet cableor PROFINET cable–SINAMICS S150PROFIBUSCP 5711communication moduleUSB adapter for connecting a PG or notebook toPROFIBUS or MPIUSB cable (2 m (6.56 ft)) included in scope ofsupply6GK1571-1AA00 SIMATIC DP plug-incable12 MBaud, for PG connection, pre-assembled with2 × 9‑pin SUB D connector, 3 m (9.84ft)6ES7901-4BD00-0XA0PROFINET/ EthernetStandard CAT5 Ethernet cableor PROFINET cable–SINAMICS G130PROFIBUSCP 5711communication moduleUSB adapter for connecting a PG or notebook toPROFIBUS or MPIUSB cable (2 m (6.56 ft)) included in scope ofsupply6GK1571-1AA00 SIMATIC DP plug-incable12 MBaud, for PG connection, pre-assembled with2 × 9‑pin SUB D connector, 3 m (9.84ft)6ES7901-4BD00-0XA0PROFINET/ EthernetStandard CAT5 Ethernet cableor PROFINET cable–SINAMICS G150 PROFIBUSCP 5711communication moduleUSB adapter for connecting a PG or notebook toPROFIBUS or MPIUSB cable (2 m (6.56 ft)) included in scope ofsupply6GK1571-1AA00 SIMATIC DP plug-incable12 MBaud, for PG connection, pre-assembled with2 × 9‑pin SUB D connector, 3 m (9.84ft)6ES7901-4BD00-0XA0PROFINET/ EthernetStandard CAT5 Ethernet cableor PROFINET cable–SINAMICS DCMPROFIBUSCP 5711communication moduleUSB adapter for connecting a PG or notebook toPROFIBUS or MPIUSB cable (2 m (6.56 ft)) included in scope ofsupply6GK1571-1AA00 SIMATIC DP plug-incable12 MBaud, for PG connection, pre-assembled with2 × 9‑pin SUB D connector, 3 m (9.84ft)6ES7901-4BD00-0XA0SINAMICS DCM CabinetPROFIBUSCP 5711communication moduleUSB adapter for connecting a PG or notebook toPROFIBUS or MPIUSB cable (2 m (6.56 ft)) included in scope ofsupply6GK1571-1AA00 SIMATIC DP plug-incable12 MBaud, for PG connection, pre-assembled with2 × 9‑pin SUB D connector, 3 m (9.84ft)6ES7901-4BD00-0XA0 1) An overview of all the supplementary products (e.g.cables and connectors) that are available for the distributedconverter family can be found at the following link: http://www.siemens.com/distributeddrives-supplementaryproducts 更多信息STARTER 调试工具也在以下网址提供： |
概述西门子一级授权代理商|DP电缆代理商 
SINAMICS DCC（传动控制图）是 SINAMICS S120/S150/G130/G150/MV/DCM/DCP变频器的工艺扩展。这样就能通过可自由获得的闭环控制、算术和逻辑块来具体扩展 SINAMICS 变频器系统的设备功能。面向STARTER 的 SINAMICS DCC 可用来对这些块进行简单的图形化组态，并将它们集成在传动装置中。
提供了一个用于组态的内容丰富的标准库，该库可通过附加的库（所谓 DCB Extension）来扩展。
西门子应用支持提供了一系列可供下载的示例应用（卷绕机、同步操作、横向切割机等），这些应用基于含有 STARTER 的SINAMICS DCC，可用作现成的解决方案或单独进行调整或扩展。
更多信息，请参见“传动应用”部分。
对硬件和软件的要求极低
参见 STARTER 调试工具。
现有SIMATIC CFC Editor 的低软件要求
安装 STARTER V5.4 SP2 和 SINAMICS DCC V3.4 SP2 需要至少满足以下要求：
在独立设备中使用 STEP7 OEM V5.7 时SIMATIC CFC Editor V9.0 SP5 Upd4
使用 STEP7 V5.7 完整版时（带有应用完整性监控功能）：SIMATIC CFC Editor V9.0 SP5Upd4
使用 STEP7 V5.7 完整版时（不带应用完整性监控功能）：SIMATIC CFC Editor V9.0 SP3Upd4
使用 STEP7 V5.6 SPx 完整版时：SIMATIC CFC Editor V9.0 Upd1
安装 STEP7 或 SIMATIC PCS 7 时，请检查与产品 SIMATIC CFC 相关的低要求。
选型和订货数据（印刷版）西门子一级授权代理商|DP电缆代理商
SINAMICS DCC consists of a graphic configuration tool (DCC Editorbased on SIMATIC CFC) and the standard library. SINAMICS DCC isinstalled as an add-on to the STARTER commissioning tool.
The SINAMICS DCC V3.4 SP2 software package is a component ofSTARTER V5.4 SP2.
The necessary license key (floating license) for the configurationof SINAMICS DCC V3.4 SP2 must be ordered separately.
The included DCB standard library of SINAMICS DCC V3.4 SP2 does notrequire a runtime license. Existing licenses for SINAMICS DCCV2.1 and higher can also be used for SINAMICS DCC V3.4SP2.
An upgrade variant for the application in STARTER V5.4 SP2 andSINAMICS DCC V3.4 SP2 is available for an existing license key ofSINAMICS DCC V2.0 SPx.西门子一级授权代理商|DP电缆代理商
Description | Article No. |
|---|---|
SINAMICS DCC V3.4 SP2 License Key for SINAMICS DCC V3.4 and V3.4 SP2 | |
| 6AU1810-1HA34-0XB0 |
| 6AU1810-1HA34-0XF0 |
SINAMICS DCB Extension license Runtime license for license upgrading with firmware version V4.6 orlater | |
| 6SL3077-0AA00-0AH0 |
SINAMICS DCB Studio V2.3 Development tool for programming blocks that can be imported as anadditional library (DCB Extension) for SINAMICS DCC in STARTER orin the TIA Portal | On request |
西门子一级授权代理商|DP电缆代理商
Further information about SINAMICS DCB Extensionand SINAMICS DCB Studio can be found in the section SINAMICS DCC(Drive Control Chart) in the TIA Portal.
西门子一级授权代理商|DP电缆代理商