西门子一级授权代理商|电缆代理商
非住宅和工业建筑中的配电系统电气规划从未像在这样复杂。为了确保规划人员对 SINAMICS变频器进行佳电气规划，西门子通过以下高效软件工具提供支持：SIMARIS design 用于进行选型计算，SIMARISproject 用于计算配电柜的空间要求。
支持的 SINAMICS 变频器：
SINAMICS G120、SINAMICS G120D、SINAMICS G120X
SINAMICS G115D
SINAMICS G130、SINAMICS G150
SINAMICS ASSISTANT app 的错误代码功能有助于识别和纠正错误。只需输入变频器的错误代码，该 app就会显示错误的种类及纠正方法。
该 app 还可将变频器的频率 (Hz) 换算为需要在电机上设置的转速 (rpm) 或
该 app还提供了一个支持页面，当因有问题时，可在该页面上直接与您所在地区的正确联系人进行联系。还免费提供有视频信息，例如，SINAMICSG120 变频器的安装与调试说明。
该应用有安卓和 iOS 版本，可从以下链接免费下载：
概述西门子一级授权代理商|电缆代理商
SINAMICS DriveSim Basic provides easy-to-use models forPROFIdrive-enabled SINAMICS converters, so you can create a digitaltwin of your drive.
The models are validated and tested against real SINAMICSconverters and are available in the form of a standardized FMU(Functional Mockup Unit). Therefore, they are compatible withvarious standard time-based simulation programs such as SIMIT,Simcenter Amesim, ANSYS Twin Builder, MATLAB Simulink orHopsan.
SINAMICS DriveSim Basic is another element in your engineeringtoolbox. Together with other virtual Siemens solutions, e.g.SIMATIC S7-PLCSIM Advanced or NX Mechatronics Concept Designer, aconsistent model-based development process can be implemented.
西门子一级授权代理商|电缆代理商
优势
Speed up time-to-market for OEMs
Test validated SINAMICS models under real conditions already atthe design or planning stage and make needed adjustments
Identify issues and improvement capabilities early in the designstage and reduce testing effort to save time and cost
Download is free of charge. The ideal entry point for drivesystem simulation
Valid for the most commonly used Siemens drives
Advantages of SINAMICSDriveSim Basic compared to SIMIT PROFIdriveblocks:
Increased level of detail due to speed controller, currentsetpoint filters and internal load model
Identical parameter values and meaning as in the real SINAMICSdevice
Direct reference to SINAMICS documentation
Validated against the real SINAMICS drive
No wiring effort to represent functional configurations
Significant reduction of SIMIT simulation tags (even more ispossible if unused in-/ outputs are deselected within the ComponentType Editor (CTE)西门子一级授权代理商|电缆代理商
Enables simulation of an (internal) two-mass oscillator asapplication with realistic SINAMICS parameter settings, besides theknown limitations by the minimum sample time in SIMIT
Compatible with every FMU Co-Simulation 2.0 compatiblesimulation too
应用西门子一级授权代理商|电缆代理商
With SINAMICS DriveSim Basic, you can implement three major usecases:
Providing load characteristics for drive selection anddimensioning
Virtual commission your PLC already in the design phase
Test and improve interaction between PLC, drives and applicationvirtually
Use case 1: Providing loadprofiles for drive sizing西门子一级授权代理商|电缆代理商
If you are designing a machine, you want to make sure that youselect the SINAMICS converter and SIMOTICS motor most suitable foryou drive application. As SINAMICS DriveSim Basic iscontrol-unit-agnostic and thus represents a generic drive, you canparametrize it according to the functionality of your application.Running the simulation results in load characteristics, i.e. torqueor speed curves over time. You can import these load profiles intoTIA Selection Tool to select the suitable Control Unit anddimension the drive to best fit to the demand. So as a result youhave well selected SINAMICS converters and SIMOTICS motors with thehelp of the digital twin.
Use case 2: Virtualcommission your PLC already in the designphase西门子一级授权代理商|电缆代理商
If you are designing a machine, you want to make sure the PLC codeworks with your SINAMICS drive. After writing the PLC code in TIAPortal, you can connect it via PLCSIM Advanced to any time-basedsimulation tool (e.g. SIMIT). Integrated into the simulation tool,SINAMICS DriveSim Basic acts as a realistic communication partnerfor the PLC. Next, you can commission the virtual PLC in TIA Portalas you would do with a real PLC connected to a real drive. Withoutsimulation, you would need to do that on-site. With simulation, younot only save time, but also have the freedom to try out variousconfigurations and optimize your PLC code early in theprocess.西门子一级授权代理商|电缆代理商
Use case 3: Test and improveinteraction between PLC, drives and applicationvirtually
With the third Use case, you can connect a simulation tool such asNX Mechatronic Concept Designer to visualize the mechanicalmovements of your application. This way, you ensure that the drivebehaves according to the desired machine performance. You can testseveral fault scenarios and optimize the interaction between PLC,application and drive virtually so overall, you can avoid unplannedmachine behavior and increase the performance of yoursetup.西门子一级授权代理商|电缆代理商